Welcome to WetnDry Boardsports

Severne Blade Windsurf Sail 2016

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Severne Blade Windsurf Sail 2016

Availability: Out of stock

£489.00

Quick Overview

or to order by phone call
+44 (0)1268 56 99 88

Details

Severne Blade Windsurf Sail 2016

The 016 Blade is a 100% X-Ply wave sail designed to create the perfect blend between power and control.

 

Sail profiles are designed for maximum stability and wind range.  Moderate head tension allows responsive twist.

 

The SpiderFibre technology has radically reduced the swing weight, whilst also creating a much stronger clew.

 

To achieve its incredible weight/strength ratio, the 016 Blade is entirely built from proprietary X-Ply laminates specifically designed for each area of the sail: lightweight eM3 body panels, Dyneema X-Ply window and heX-PLY foot.

 

The 016 Blade is the wave sail to choose for all-round high performance.

 

UPGRADES FOR 20I6 - 

 

  • RATIONALISED PANEL LAYOUT.
  • NEW DYNEEMA WINDOW X-PLY FOR IMPROVED VISION.
  • I00% XPLY
  • DOUBLE SEAMS EVERYWHERE
  • TIME TESTED

 

 - THERMOFORMED HEAD PATCH

Protects the adjustment webbing and head assembly stitching from wear during rigging, carrying and launching.

 - SEAMLESS HEAD PANEL

This high abrasion area is made from only 1 panel and does not carry any exposed seams, preventing any potential weak point in this area. 
As a result, seam creep and seam-related failure have been eliminated.

 - eM3

DURABLE AND LIGHTWEIGHT

eM3 is developed to combine the performance of the e-series cloths with maximum durability. The addition of a 90-degree pre preg
polyester scrim has provided unique tear resistant characteristics and the off-axis loads are carried through the 22-degree X-ply fibres.
The red and new blue adhesive maintain the UV resistance and tear strength, while the reduced film thickness significantly reduces the
weight. The use in the upper panels reduces not only the overall sail weight, but also the swing weight, aiding manoeuvrability and control.
Used in the BLADE and in the FREEK.

SCRIM: Polyester    

X-PLY: Polyester   

GSM: I60.6Igsm

 - DOUBLE SEAMS

All Severne wave sails have 25mm double stitched window seams.  The wider, single colour seam tape ensures maximum tear strength and crash resistance

 - STABILIZOR PANEL

A key component in stabilising the leading edge, the STABILIZOR PANEL is a panel of thicker 188 Monofilm.  This material has minimal stretch in all
directions and enables the high skin tension to create a very rigid profile for instant acceleration and maximum wind range.

Another benefit of the low stretch properties of 188 Monofilm is that the designed sail shape is maintained for longer as there is less long term stretch.
This is pretty important as there are high downhaul loads which can cause most race sails to lose their original shape quickly

 - SPIDERFIBRE

A web of fibreglass filament that disburses loads across seams and throughout the body of the sail. By using stronger, lighter fibres and reducing sail patching,
we can measurably reduce weight and swing weigh and at the same time, increase strength.

Traditional sail-making utilises small corner patches that diffuse the load approx 30cm, often ending before or even at a seam creating a weak spot that is
susceptible to damage. By using stronger, lighter fibres these radials measurably reduce weight and increase strength. For improved manoeuvrability, swing
weight is also reduced as the clew patch weight has been replaced with lightweight vectors that extend the full width of the foil.

PRIMARY SPIDERFIBRE - Radiates load from the clew through the sail body bridging vital seams.

TERTIARY SPIDERFIBRE - Massively increases perimeter strength

 - BOOM HEIGHT REFERENCE

Boom height gauge for ease of reference

 - 3&4 ROLLER TACK PULLEY

Roller tack pulleys are matched to the sails downhaul requirements and aligned for friction free downhauling and threading ease.  Rig your sails with the Severne
Hardware Division extensions for function and simplicity

 - SEAMLESS FOOT CONSTRUCTION

A single panel in the foot area with hidden load patches and zero exposed stitching eliminates seam abrasion and seam creep in this high load area. 
Maximum durability and minimum weight

 - INTERNAL PRINTED X-PLY

Printing the films prior to lamination with the x-ply gives us the flexibility to use multi-coloured, custom graphics. The print is of minimal thickness,
reducing weight and producing a higher definition of colour. During lamination the printed side is placed on the inside of the film so there is no need
to worry about wear. Your sails will forever remain looking bright and fresh


BLADELUFFBOOMBATTENSWEIGHTHEADRECOMMENDED MAST
3.0 333 140 5 2.5 ADJ SEVERNE 340 Wave
3.3 348 142 5 2.6 ADJ SEVERNE 340 Wave
3.5 356 144 5 2.7 ADJ SEVERNE 340 Wave
3.7 366 147 5 2.8 ADJ SEVERNE 340 Wave
4.0 382 155 5 2.9 ADJ SEVERNE 370 Wave
4.2 392 158 5 3.0 ADJ SEVERNE 370 Wave
4.5 402 159 5 3.0 FIXED SEVERNE 370 Wave
4.7 404 163 5 3.0 FIXED SEVERNE 400 Wave
5.0 412 167 5 3.1 FIXED SEVERNE 400 Wave
5.3 432 172 5 3.4 FIXED SEVERNE 400 Wave
5.5 432 178 5 3.4 FIXED SEVERNE 430 Wave
5.7 438 180 5 3.5 FIXED SEVERNE 430 Wave
6.2 458 185 5 3.6 FIXED SEVERNE 430 Wave
6.7 463 189 5 3.7 FIXED SEVERNE 460 Wave

Part Exchange welcome on this product - Looking to trade in your old kit for something new?  Just send us some details of what you would
like to trade in along with pictures and your contact details to: info@wetndryboardsports.com and we will get back to you with a price.

Compare Products

You have no items to compare.

0% Finance

FREE SHIPPING

sup

Information

Address

  • Wet n Dry Boardsports
  • Sadlers Hall Farm
  • London Road, Bowers Gifford
  • Basildon, Essex
  • SS13 2HD

Find us here:

OpeningTimes:

Monday 9.30 - 5.30

Tuesday 9.30am - 5.30pm

Wednesday 9.30am - 5.30pm

Thursday 9.30am - 8.00pm

Friday 9.30am - 5.30pm

Saturday 9.30am - 5.30pm

Sunday Closed

Tel: 01268 56 99 88

Email: info@wetndryboardsports.com

PAYMENT METHOD

+ open/close