Neil Pryde SPX 65 RDM Windsurf Mast

Neil Pryde SPX 65 RDM Windsurf Mast

SPX65 mast is now the lowest carbon content mast in our range with 65% carbon content. Thanks to the added fiberglass prepreg layers in the lamination process it is virtually indestructible. Use of fiberglass results in considerably thicker walls making the mast immune to ovalization under compression as well as very resistant to impact damage. In weight it is very close to the previous FLX70 range and we believe this is the minimum carbon content we should recommend for a Neil Pryde sail

Bend Curve

The Neil Pryde mast range is designed following the Progressive Flex concept and so when used with a Neil Pryde sail they have the correct shaping, twist and ability to remain stable in variable conditions.

All Neil Pryde mast models of the same length will have the same bend curve. This means you are not limited to a particular mast model to match your sail. The curve will only differ across different mast lengths, regardless of the model (TPX100, SPX90-95, SPX65). Our shorter masts are close to ‘flex-top curve’ while longer masts are closer to ‘constant curve’ - this is why we call it the Progressive Flex.

The distance from the bottom of the mast to the boom is relatively constant between all mast lengths. On short masts the boom head is connected at a higher point than on longer masts. To compensate for much less ‘flexing length’ above the boom, short masts will have a softer top section compared to long ones as there is much more sail area above the boom that needs to be supported by the mast.

Since sails are designed around specific mast bend curves, we recommend using a Neil Pryde mast with a Neil Pryde sail as you will get the maximum performance out of your rig.